Heavy Duty Desktop Stapler
Symbolbild (Stockfoto); nicht das abgebildete Produkt.
Capacity And Staple Length Go Together
A stapler's sheet capacity depends on the staple length it takes, and using short staples in a heavy stapler produces a bent unclosed staple rather than a bound document.
Longer staples handle thicker stacks, and a stapler must be designed for them since the mechanism has to drive and clinch a longer leg.
Matching staple size to both the stapler and the thickness being bound is what prevents the majority of problems people attribute to the stapler itself.
Jamming Is Usually The Staples
Cheap staples made from softer wire bend rather than penetrating, which jams the mechanism and is the commonest cause of a stapler that has stopped working.
Better staples are harder, sharper and more consistently formed, which means they drive straight through and clinch cleanly.
A stapler that jams constantly with cheap staples frequently works perfectly with better ones, which is worth trying before replacing the stapler.
Clinch Quality
A flat clinch folds the staple legs completely flat against the paper, which means stacked documents lie flatter and take less space in a file.
A standard clinch leaves the legs at an angle, which is adequate for loose documents and builds up noticeably in a filing cabinet.
Some staplers offer both, with a switchable anvil, and the flat setting is worth using for anything being filed in quantity.
Loading And Mechanism
Top-loading staplers open upward and are loaded in seconds, where front-loading ones slide a magazine out and are fiddlier.
A stapler whose loading mechanism is awkward gets loaded less often and is more likely to be left empty in a drawer.
Full-strip capacity means fewer reloads, which for anything used regularly is a genuine convenience.
Removing staples is the other half of the job and is done badly by most people, since pulling a staple straight out tears the paper around the holes. A staple remover that opens the clinched legs first and then lifts the staple out leaves the paper intact, which for any document being refiled rather than discarded matters. The squeeze type is gentler than the jaw type, and either is better than a fingernail or the edge of a desk.
Alternatives are worth a thought for anything that will be separated again, since a staple makes two permanent holes in every sheet. Binder clips hold a thick stack with no damage at all and are reusable indefinitely, and for a document being read, amended and reassembled that is plainly better. Staples suit anything being filed permanently and archived, where the holes are irrelevant and the binding must not come apart in handling.
Reduced-Effort Mechanisms
Standard staplers require considerable downward force for a thick stack, which for anybody with limited hand strength is a real barrier.
Leverage-assisted staplers reduce the force needed substantially using a longer arm or a spring mechanism, at the cost of a larger footprint.
For anybody stapling in volume or with hand or wrist problems, those mechanisms are worth seeking out specifically rather than treating as a luxury.
The Verdict
A tool where staple quality and matching staple size to the job prevent almost all the problems people blame on the stapler.
Cheap staples jam, short staples in a heavy stapler bend, and standard mechanisms need real force on thick stacks.
Try better staples before replacing a jamming stapler. Soft cheap wire bends rather than penetrating, and that is the usual cause.
Auf einen Blick
Vorteile
- Handles thick documents without bending staples
- Flat clinch keeps filed documents compact
- Full-strip capacity means fewer reloads
- Leverage mechanisms reduce force substantially
Nachteile
- Cheap staples jam constantly
- Wrong staple length bends rather than binds
- Standard mechanisms need real hand force
- Leverage versions have a larger footprint
Häufig gestellte Fragen
Why does my stapler jam?
Almost always the staples. Cheap ones made from softer wire bend rather than penetrating, which jams the mechanism. A stapler that jams constantly frequently works perfectly with better staples, which is worth trying first.
What staples should I use?
Ones matched to both your stapler and the thickness being bound. Short staples in a heavy stapler bend rather than closing, and longer ones need a mechanism designed to drive and clinch a longer leg.
What is a flat clinch?
The staple legs fold completely flat against the paper rather than sitting at an angle, which means stacked documents lie flatter and take noticeably less space in a filing cabinet over many documents.
Spezifikationen
| Type | Heavy duty desktop stapler |
| Capacity | Depends on staple length |
| Commonest fault | Cheap soft staples jamming |
| Flat clinch | Keeps filed stacks compact |
| Standard clinch | Legs at an angle; bulkier when filed |
| Loading | Top loading is fastest |
| Reduced effort | Leverage or spring mechanisms |
| Match | Staple size to stapler and stack thickness |
Fazit
Try better staples before blaming the stapler. Cheap soft wire bending is the cause of almost every jam.
Preis auf Amazon prüfen